Siri isn’t talking or available? It doesn’t devour your voice anymore. Or it’s just not responding after you upgrading your iPhone to iOS 13? Siri usually works great on iPhone and iPad, but sometimes Siri stops working, or Siri might not work as intended. If you experience problems with Siri, this guide will walk you thru troubleshooting Siri. Here, in this article, we have discussed the simplest and straightforward methods to Fix if Hey Siri isn’t Working on iPhone 8 or 8 Plus.

Siri is one of the neatest virtual assistants and a serious reason we love the iPhone. When activated by the ‘Hey Siri’ voice command, it listens and responds to everything you say, and may even be funny. together of the foremost useful functions on the iPhone, Siri helps us tons and it’ll cause some inconvenience if there are any problems with Siri. So, it’s quite unfortunate when it stops responding. If you’re facing this issue of Siri not performing on your iPhone.

Also Read

iPhone 8 and 8 Plus Support End Date

Fix, Hey Siri isn’t Working on iPhone 8 or 8 Plus

Check Siri’s Servers

If your internet connection is fine and works with other apps, the problem may be on Apple’s side of the fence. Go to Apple System Status Site and take a look if there are any reported issues with Siri and Spotlight Suggestions. Any service with a problem shows the yellow yield-like icon. Tap the issue to see details and any updates.

Check Whether Low Power is ON?

Make sure Low Power Mode is disabled. The main Siri app and Hey Siri function will not work if low power mode is turned. If necessary, turn off Low Power Mode or charge your iPhone until it has sufficient battery charge then try using Siri and test Hey Siri function by then. To do so, head over to Settings-> Battery-> Low Power Mode then tap the switch to turn it off.

Normal or Forced Restart

The first troubleshooting step that you want to do is restart your iPhone. This may seem simple to you but a lot of minor bugs and app issues are fixed by just turning a device off for a few seconds.

  • Press and hold the Top (or Side) button until the slider appears.
  • Drag the slider to turn your device completely off.
  • After the device turns off, press and hold the Top (or Side) button again until you see the Apple logo.

A soft reset or forced restart should be able to deal with it. Here’s how it’s done:

  • Press and quickly release the Volume Up button.
  • Press and quickly release the Volume Down button.
  • Press and hold the Side/Power button until the Apple logo appears.

Re-enable Hey Siri

If Hey Siri not working on iPhone, or it cannot understand you anymore, probably Hey Siri isn’t enabled or Siri is just not working on your device. Just enable or re-enable Hey Siri function to rescue.

  • Go to Settings > Siri and then tap on Allow Hey Siri.
  • Then iPhone will ask you to set it by saying Hey Siri several times so that it will recognize your voice.
  • If Hey Siri is in the status of turning on, just turn it off and turn it on the back and set up.

If Siri isn’t Working for a Particular App

If Siri is not working with some of the particular apps, for example, WhatsApp, then maybe possible that this app is not allowed to access Siri. You can enable the Siri function with the following methods:

  • Go to the Settings app on your iPhone, navigate to the particular app for which Siri is not working, and open it.
  • Tap on Siri & Suggestions option.
  • Toggle on Use with Siri and click it.

Clean the Microphone

If dust or dirt is covering your iPhone microphone, it can affect the quality of sound received by the microphone. It can block the sound to reach the microphone. You can clean it by using a dust blower to get rid of the dust from there. Moreover, you can also use a toothpick or needle to get off the dirt but do it gently and carefully.

Toggle Dictation

Sometimes if there is a bug present in the dictation process of your Apple device, then it becomes difficult for Siri to understand instructions given. If a bug is a present, you can remove the bug in order to fix Siri not working issue by toggling on or off the dictation function in the settings app. To get this task done follow these steps given below:

  • Open the Settings app and open the General menu.
  • Scroll down to the Keyboard option and click it.
  • In the Keyboard menu, you will find the Dictation option. Press the toggle button to off/on the Dictation option.

Recalibrate Hey Siri

When you set up Hey Siri for the first time, you’re asked to say “Hey Siri” a few times before the service can initialize. This is because the feature requires some form of calibration before it can be used.

If Hey Siri never seems to be able to understand you, then it might be worth going through this calibration process once again.

  • This is done by going to the Settings app and navigating to Siri & Search
  • Then go to Listen for “Hey Siri”.
  • and then disabling the already-enabled feature and then turning it back on again.
  • Tap on the button to continue.
  • And you’ll be taken through the calibration steps where you’ll have to say something.
  • Your device will then re-learn your voice.

This tip may come in handy for those with heavy accents, or for those that normally mumble when they use Siri, but need to talk louder to get the feature to work.

Toggle Airplane Mode

Another simple yet very effective solution to random errors is the Airplane Mode trick. It works by simultaneously restarting the phone’s wireless system and thereby eliminates random errors. Here’s how it’s done:

  • Tap to open the Settings app from the Home screen.
  • Scroll to and tap on the Airplane Mode menu.
  • Tap the Airplane mode switch to turn it on. Doing so will disable your iPhone’s wireless radios as well as its Wi-Fi features.
  • While the Airplane mode is enabled, perform a soft reset on your phone.
  • Once the phone is finished booting up, go back to Settings-> Airplane mode then toggle the switch to disable the feature.

Enable Wi-Fi and reconnect to your Wi-Fi network afterward and see if the problem is fixed.

Advertisement

Reset Network Settings

  • Tap on the Settings icon from the home screen on your iPhone.
  • Tap on General.
  • Next, scroll down to the bottom and tap on Reset.
  • Choose Reset Network Settings and enter the device passcode to continue, if prompted.
  • Finally, tap on Reset Network Settings again to confirm the task.
  • Wait for it and reboot the handset.

Check for Software Update

Most likely, Apple is already aware of the problem and working on a fix without giving out any official statement. Assuming that it’s indeed a software issue, the official fix will likely be entrenched into the new firmware update that’s rolled out next so you better not miss it.

  • Open the Settings app from the home screen.
  • Tap General.
  • Tap Software Update.
  • If there is an update available, follow the onscreen instructions to install the updates on your iPhone.

Perform Factory Reset

Last but not the least, you can reset your iPhone settings and data completely to run your device in the default settings.

  • Go to the iPhone Settings > General > Reset.
  • Select Erase All Contents and Settings > choose Erase Now.
  • You have to enter the passcode if prompted.
  • Tap on Erase iPhone.
  • Then tap on Erase iPhone again to continue the action.
  • If prompted, enter your Apple ID and password.
  • Then tap on Erase to continue.
  • Wait for it and it will reboot your iPhone.

Restore your iPhone in iTunes via Recovery Mode

It’s an advanced type of iOS restore you can do when dealing with more intricate system errors that caused a device to malfunction. In this case, you will need to put your iPhone in a recovery mode state first and then restore iOS in iTunes.

  • Press and quickly release the Volume Up button.
  • Press and quickly release the Volume Down button.
  • Press and hold the Side/Power button when you see the Connect to iTunes screen. Do not release the buttons when you see the Apple logo since you’ll need to enter recovery mode.
  • On the next screen, you should see the option to Restore or Update.
  • Select Update first to update iOS. Otherwise, select the option to Restore.

Wait for iTunes to attempt to reinstall iOS without erasing your data. iTunes then downloads the software for your device. If the download takes more than 15 minutes, your iPhone exits the Connect to iTunes screen. If this happens, wait until the download is finished then go back to the previous steps to enter recovery mode again.

Restore your iPhone in iTunes via DFU mode

It’s regarded as the deepest type of system restore you can do on your iPhone. It allows your device to communicate with iTunes on a computer without loading the operating system or bootloader

Here’s how to perform a DFU mode restore on your iPhone 8:

  • Close any running programs on your computer.
  • Connect your iPhone to your computer using the Apple-supplied USB connector or Lightning cable.
  • While your phone is connected, press and hold the Side/Power button for about 3 seconds.
  • Keep pressing on the Side/Power button then press and hold the Volume Down button for about 10 seconds. If the Apple logo appears, it means you’ve held the buttons too long and that you’ll have to start all over again.
  • If you see no logo, release the Side/Power button but keep holding the Volume Down button for another 5 seconds.
  • If the screen stays black afterward, it means that you have successfully entered DFU mode. At this point, you will be prompted with an alert message on your computer saying that iTunes has detected your iPhone. If you see that message, follow the onscreen prompts to complete the DFU mode recovery process.
  • If you see the Plug into iTunes screen, it means you haven’t entered DFU mode and that you will need to start all over again.

If none of that works, then most likely what you’re dealing with is a hardware problem.

Contact Apple

If everything listed above fails, you may want to contact Apple. A malfunctioning device may be covered under your limited or extended warranty, and Apple seems to be very happy to resolve problems for any covered device free of cost.

Conclusion

That was it, this was the easiest way to fix if Hey Siri isn’t Working on iPhone 8 or 8 Plus. Are you facing any problems and issues with your iPhone 8 Series? Then there is nothing to worry about, we have an article dedicated to iPhone 8’s issues and guides. Here is the iPhone 8 Troubleshooting Guide. Although it’s rare, some cases of the issues on Apple devices may have bad hardware as the origin. If a factory reset won’t help in fixing your issue, visit your local Apple Store or Service Center so a qualified technician can examine the hardware. If needed, they may send it in for repair or replacement.

Do you own an iPhone 8, or any Apple device and need these types of simple tutorials? Then stay tunned to GetDroidTips’ iPhone Tips & Tricks column because many simple tutorials for Poco are coming soon.

If you have any queries regarding this, the comment section always available for you.

  • How to Fix if iPhone 8 Keeps Losing Wi-Fi Signal
  • How to Fix if Camera App Keeps Crashing on iPhone 8 or 8 Plus
  • iPhone is Charging Very Slow. How to Fix on iPhone 8 or 8 Plus?
  • How to Fix if iPhone 8 Stuck on Blank or Black Screen
  • How to Fix Bluetooth Pairing Problem on iPhone 8 or 8 Plus
  • How to Enter Recovery Mode on iPhone 8 or 8 Plus